You have to install the Cummins INLINE 7 Data Link Adapter drivers before using it. Cummins INSITE 8.3 software which works with Cummins INLINE 7 support Win7 and Win10.

There are 9 steps to navigate, please follow on step by step.

1. Please download software at first:

https://mega.nz/#!XnwzFTLR!MtAloZTilHTtikrwrjoNYyrUOZ3bBKovdltoOJ9f868

2. Extract zip and Double-click on the setup.exe file to run the install.

3. The Welcome to INlINE7 Setup screen is displayed and please carefully read the information to follow the recommendations. Then click Next.

4. Read all the all information on this screen, then click I Agree

5. Carefully read the warning message, and disconnect all RP1210 adapters to which your laptop or PC might be connected prior to proceeding with the installation.

6. Once you have complied with the requirements of the warning message, click OK to continue.

Question:

I got the vxdiag vcx se 6154 with odis 8.2.0 hdd. I have a question. Is it possible to login online with vxdiag for vw coding? I do have an online account.

Can I login your software to access online or must i download the program from the official to login to use?

Solution:

vxdiag is able to perform online coding with an online account which we don’t provide.

You can directly log in with our software. Don’t need to download official program to login.

Question:

I got the vxdiag vcx se 6154 with odis 8.2.0 hdd. I have a question. Is it possible to login online with vxdiag for vw coding? I do have an online account.

Can I login your software to access online or must i download the program from the official to login to use?

Solution:

vxdiag is able to perform online coding with an online account which we don’t provide.

You can directly log in with our software. Don’t need to download official program to login.

Ford IDS 118.01 is verified working fine with VCM2 clone and vxdiag vcx nano by running with win7/8/10 32/64bit.
Download Free
Ford IDS V118.01
https://mega.nz/folder/fcoVnYZT#jpEjr4HHXU5Ifg8Hm0xERg
Mazda V118.01
https://mega.nz/folder/bMg1ECzT#BjEMSq1TUvdgn2aT2CKTEg
IDS patch for VCX Nano
https://mega.nz/#F!OV4RRC6B!seCWP6UCzOPWEDYlQxZ1iQ

OS: win7/8/10 32/64bit

Language:  English, German, French, Italian, Dutch, Spanish, Swedish, Finnish, Danish, Norwegian, Portuguese etc
Compatible with VXDIAG VCX NANO for Ford Mazda (USB & Wifi version ) vxdiag vcx pro, vxdiag full, vcm2 clone (using vxdiag solution) etc.

How to install Ford /MAZDA IDS V118.01 For VXDIAG VCX NANO & VCM2  video: https://youtu.be/0UoRauT_N5E

Procedure

Open the folder “Ford Install”, then “IDS-118.01_Full”.

Choose IDS language.

Recommend you restart the computer.

Welcome to the InstallShield Wizard for IDS.

Agree the license agreement.

Please select the destination drive, then click on “Next”.

IDS is configuring your new software installation.

Updating the database.

Reboot the computer.

Open the folder “Ford Install”, then “VCI_Software_1.0.0.0.” to install until successfully.

Open “VCI Manager (Ford) 19.04.28″.

Open “F-M_Patch” then copy “IDSPatch” and paste it on the desktop.

You need to connect VCM2 (or vxdiag vcx nano) and car now.

Open “IDSPatch” on the desktop, choose “Dealer type: non-dealer” and Country “Botswana”, then “confirm”.

Welcome to IDS 118.01 menu.

Choose “Start New session” -> “All other”, then confirm.

Operation in process.

Vehicle specification.

Confirm.

Self test.

Powertrain -> Engine -> retrieve CMDTCs.

Set the ignition switch to ON.

Reading continuous DTCs.

Job is done.

Good luck!
https://www.autonumen.com/goods-5280-Ford-VCM-II-Ford-VCM2-Diagnostic-Tool-With-Laptop.html

Many individuals that get their GM Tech 2, very first thing is usually to do a self-test. It is just a method to exam if your GM Tech 2 is sweet or lousy. Should the Tech 2 test isn’t excellent, we could make contact with the customer companies immediately and change a new just one or get some specialized assistance.

GM trouble codes may be retrieved with or without a code scanner on pre-1993 GM vehicles, due to the type of OBD port connector of Vetronix GM Tech 2 .This port has been changed in the later model vehicles, and Tech 2 Scanner is necessary to retrieve the codes. Once the codes have been retrieved, the accompanying site will have a list of the codes and their meaning. To erase the codes and turn the check engine light out.

This is the CAN DI test for GM Tech 2. When your Tech 2 Scanner has problem, you can use the following ways to do the test, then you can know which part of your GM tech 2 has problem.

https://www.autonumen.com/goods-6947-GM-MDI-2-Diagnostic-Tool-Multiple-Diagnostic-Interface.html
Q: Can GM Tech 2 Scanner support key coding and electronic control unit programming for all OPEL and Isuzu?

A: GM tech2 can’t support key programming; as for electronic control unit programming, you need to additionally buy a GM TECH2 and a TIS2000, but TIS2000 only support GM and Opel, not support Isuzu.

Q: Can GM Tech2 send commands to the various modules and is it able to do diagnostics on a climate control programmer? To what year is the scanner effective? I own a 1997 Cadillac DeVille and a 2001 Chevrolet Venture.

A: Yes, you can use GM TECH2 to diagnose climate control programmer, when it has communication GM Tech 2 can send commands to the modules.

Q: GM TECH 2 contains Saturn software?

A: yes, Saturn software is included in the GM software English and support for on-board diagnostics on all GM systems 1992 thru 2013.

This is from autonumen.com website technical support

Here’s the detail guide on how to update software of Mercedes Benz DoIP Xentry Connect C5 MB Star diagnostic scanner.  DoIP C5 comes with both internal hard drive and external Dell HDD .

Note:

1.The upgrade procedure fits for DoIP Xentry Connect C5 but no SD Connect C5 (SD C4 in C5 case).

2.

If you have XDOS 2018.3 or  2017.9 not working well, you should update it to version 2018.7.

If you have XDOS 2018.5 works good, it’s not necessary to update to 2018.7.

3. If you feel complicated to update the firmware by yourself.  You can send both Doip C5 HDD and Dell HDD to us to run an upgrade.

Part 1: How to remove Xentry Connect C5 internal HDD

Here’s a video explaining in detail

Part 2: How to update Xentry Connect C5 software

Tools required:

Xentry_Kit_09_2017.iso（copy to the folder:  iodd 2541 _ISO）

U disk with a Windows machine (recommend Bigbaicai WinCE)

IODD 2541 External Encrypted Hard Drive or similar

Panasonic power adapter

Xentry Connect C5 multiplexer

C5 mux in standby mode

connect the Panasonic power adapter to C5

insert IODD 2541 into the USB port on C5

in a standby mode, press “X” and “√” at the same time, then it will pop up “Start Update?”

(if not, it will pop up “Start XENTRY Connect?”. then, when the prompt disappears, it will display “Start Update?”)

When you see “Start Update?”, press “√” and Connect C5 will go into the update mode and IODD 2541 will light up

Press button “5” on IODD 2541 as soon as possible. then, the cross “X” will turn a circle “O”

what’s displayed on C5:

It will take 50-55 minutes to finish the upgrade

The system restarts after installation completes

If your system fail to start, turn off C5 mux and restart again

When C5 starts, take out the hard disk on C5 and install it into the laptop (here: Dell 55220)

Before it, pls install the Windows machine on the U disk

Press F12 when you see the pop-up “F12 Boot Options”

Select USB Storage Device and press “Enter”

Pop up the interface, and select [03] WIN2003 PE Classical

Go to the PE system and create an user account

Note that Windows should be located in disk D:

After path selection, right click on “Create a new admin account” on the left

User name: C5, Password: abc12345678
(You can have any user name and password you want)

Click on Ok

Close the application

Turn off the laptop

Take out the disk off the laptop and install it into C5 multiplexer

Done!

Part 3: How to activate Xentry Connect C5 after upgrade

Here’s teamviewer file explaining the step-by-step activation procedure

https://mega.nz/#!Gp8lzLLK!-B3Ytw1j-YoC9tWM_atYxgvmer5mbOMNxfH4BYz4D0E

Files needed to activate C5:

Activation key

2018.7 key

Black list C5

Part 4: How to install EPC WIS software

Video 1

Video 2

Part 5: How to connect C5 SD connect  with Xentry Tab/Laptop

Here’s example on connecting C5 with Xentry tablet, can be also connected with Dell D630 or Lenovo laptop.

C5 is Standby status when not connect with car

C5 has 2 USB connectors and round power connector (power by Panasonic power adapter) on left side

Connect LAN cable and power cable with C5

Press Power button foe 3 sec to turn on Tab

Connect Xentry C5 OBD cable and LAN cable

No car connected. Because it is not connected to vehicle

Xentry Tab main menu

Open Xentry Control

Then come to this interface, wait for the communication

Xentry is connected with SD C5

Click on green icon

Launch Xentry software

Run MB Star diagnostic software and start diagnose Mercedes.

Customer problem: When I install ODIS V5.1.6 software through my VAS6154 diagnostic interface. An error is displayed in the offboard diag launcher process with the words \”Framework start failed with 13\”. There is no file to choose from in the local directory.

Solution offered by Autonumen engineer:

You need to install a virtual optical drive, map the more 30 unzipped files into a CD.

And in the URL option, click “Select local directory” to select the corresponding drive.

VW AUDI ODIS diagnostic software 6.2 with dealer license, use VAS6154A Connect Car.

Are you looking for a scanning tool to replace the old one to run quickly and easy to use? GM MDI 2 will be a good choice for you. Here share the details of MDI2 including features, functions and supported protocols etc.

OVERVIEW

MDI is an interface between the vehicle DLC and a PC (by wired USB, wired Ethernet, wireless Ethernet) and TIS2 web.

GM MDI 2 Features:

Works as the high-quality Vauxhall / Opel dealer diagnostic interface
Can be used with Global TIS, GDS 2, Tech2Win software on a new laptop
Provides full dealer level diagnostics and programming
Supports all Vauxhall /Opel 16 pin vehicles from 1996 to 2017
Performs quickly and used easily

GM MDI 2 Functions:

Automatic vehicle recognition
DTC reading and removal
Complete list of live data streaming for all main ECU
Recordable / playback of live data

New software flash for existing ECU to fix drivability issues
Programming and installation of new ECU (PCM, ABS, Instrument cluster, air bag, fuel pumps etc.,)
Programming new keys
Setting / removing speed limiters
J2534 pass thru offering ECU re-flash and diagnostics for other vehicle manufacturers, when subscribed to their specified software
More dealer specific functions

What protocols does the GM MDI 2 Scanner support?

For immediate use- At present, vehicles have two buses on the 16 pin connector
(high speed and low speed GMLAN). The GM MDI communicates using all of the existing GM protocols, the same as the GM Tech2:
– UART
– Class 2
– KWP2000
– GMLAN (CAN)
Beginning with the 2008 model year vehicles, Pass-Thru will be the only programming method available. (Remote will continue to be available for previous vehicle

Where to buy GM MDI 2?
If you would like to buy Multiple Diagnostic Interface 2, click here to get more info: https://www.autonumen.com/goods-6947-GM-MDI-2-Diagnostic-Tool-Multiple-Diagnostic-Interface.html

Nissan Consult III Plus scan tool will be needed to perform the process of reflashing/reprogramming Nissan ECUs. This process works for any computer on any Nissan vehicle and is the same process if you use the factory tool (Nissan Consult) or a J2534 tool.

A Consult3+ clone can be used to flash ECU, but only work on Nissan pre-2016.  For newer Nissans, the reflash file needs to be purchased for the Nissan website and is an extra purchase to the Nissan subscription purchase you also need to make.

On some vehicles you will need to email Nissan to have the file sent to you, these vehicle do not require you to purchase the file but do require the subscription purchase.

Nissan Consult III+  ECU Reflash/Reprogramming Update Procedure

Model example: Nissan Maxima 2016

• Reprogram ECU
• Throttle valve closed position learning
• Idle Air Volume learning
• Accelerator Pedal Closed position learning
• Confirmation Start up Engine
• Erase DTCs
• Completed

Detail:

Select vehicle information, Go to Measurement Mode

Read Precaution and confirm

Read VIN and confirm
Cumminicating  with vehicle

Select Engine system->Reprogramming

Save operation log

Read and confirm operation procedure

Check vehicle detail information and confirm

Confirm vehicle condition. Remove the terminal caps of the battery and connect battery charger to battery.  Adjust the battery charger output so that the vehicle voltage is between 12.0V and 13.5V.

Confirm the RESULT is ok and confirm vehicle conditions listed on the interface

Transfer data among computer, Nissan Consult 3 plus and vehicle

Reprogramming is completed.

Perform throttle valve closed position learning

Fully release the accelerator pedal. Turn ignition ON and turn off. Then count download of 10 seconds starts.

Make sure throttle value moves during count down of 10 seconds by confirming the operating sound.

Turn Power switch/ignition SW to ON position.

Perform Idle Air Volume learning

Perform Accelerator Pedal Closed position learning
Turn ignition switch to OFF position and hold it for 10 seconds or more

Turn ignition switch to ON position and hold it for 2 seconds or more

Repeat the procedure once or twice

Turn ignition switch to OFF position

Confirmation Start up Engine
Confirm the engine keeps starts and idling normally.

Erase DTCs

The ECU reflash update procedure is completed.